Intensive-Care Ventilator KIV-A100 is a high performance, closed-loop controlled, pneumatically-driven critical care ventilator with multiple ventilation modes. System features high resolution detachable touch screen with navigation knob to view monitored parameters, pulmonary mechanics waveform, lung volumes, flow-volume loops and three-level audio-visual alarm system with 360-degree panoramic alert light.
| Tidal Volume | 20 ml ─ 2500 ml |
| Configurations | Trolley or Ceiling Pendant |
| Respiratory Rate | 1 bpm ─ 40 bpm (V-SIMV/P-SIMV/PRVC-SIMV) 4 bpm ─ 100 bpm ( VCV/PCV/PRVC) |
| Psupport | 0 kPa ─ 6 kPa |
| Pcontrol | 0.5 kPa ─ 6 kPa |
| Pulmonary Mechanics Waveform | 3 |
| Loops | 2 |
| Standard Ventilation Modes | VCV (A/C) PCV (A/C) SIMV (VCV) SIMV(PCV) SIMV (PRVC) SPONT/CPAP NIV/CPAP NIV/PCV BIVENT |
| Combined Ventilation Modes | SPONT+PS SIMV(VCV)+ PS SIMV(PCV)+PS SIMS(PRVC)+PS BIVENT+PS VCV+SIGH NIV/CPAP+PS |
| Inspiration Time | 0.1 s ─ 12 s |
| Inspiratory Pause Time | 0 s ─ 4 s |
| FiO2 Range | 21% ─ 100% |
| Trigger Sensitivity | Pressure : - 2 kPa to 0 kPa (above PEEP) Flow : 0.5 LPM ─ 20 LPM (base flow) |
| PEEP | 0 kPa ─ 5 kPa |
| Suction | < 2 min |
| Nebulizer | 30 mins |
| Pressure Values | Pplat / Ppeak / Pmean / PEEP |
| Volume / Flow values | VTI / VTE / MV / MVspont |
| Time Values | Ftotal / Fspont / I : E |
| Oxygen Monitoring | Without O2 sensor ( O2 sensor optional ) |
| Gas Supply | O2, Air (0.28 MPa – 6 MPa) |
| Real-time Curves | Pressure-Time Flow-Time Volume-Time Pressure-Volume loop Flow-Volume loop |
| Alarm | Upper and Lower limits : MV, Paw, PEEP, Airway Pressure continuous high, VTE, Fspont high Other Conditions : Tapnea, ,Power Fail, Nebulizer, Battery low, Battery exhausted, Air supply failure, O2 supply failure, Air and O2 supply failure, Fan block, Pipe block, Circuit disconnected |
| Display | 12.1” TFT LCD touch screen |
| Internal Battery | > 1 hour |
| Maximum Security Pressure | ≤ 8 kPa |
| Compliance | ≤ 4 ml / 100 Pa |
| Noise | ≤ 65 dB (A) |
| Communication | RS232, VGA, Nurse Call |
| Operational Temperature | 5 °C to 40 °C |
| Relative Humidity | ≤ 90 % (non-condensing) |
| Atmospheric Pressure | 50 kPa – 106 kPa |
| Power Supply | 110 V – 240 V (50 Hz / 60 Hz), 65 VA |
| Dimensions | 328 x 410 x 410 mm |
| Weight | 20 Kgs |
Pneumatic-driven Flow Multiple Ventilation modes with BIVENT and PRVC Modes Invasive and Non-invasive Modes Flexible Configuration 15 Display Parameters Alarm Recording Feature Lung mechanics function monitoring
Used in operating rooms, surgical care wards, intensive care unit, and other departments for pulmonary life-support during acute lung injury or respiratory distress which result in inadequate oxygenation or ventilation inability to protect the airway fluids.
Infant Incubator is used in neonatal care to regulate temperature and humidity conditions inorder to maintain a controlled environment for neonates. Acmed Equipment Infant Incubator range features accurate temperature and humidity monitoring and regulation, accessible outer shell with easy-to-clean surfaces, spacious adjustable baby bed.
Infant Warmer is an essential equipment in neonatal care to regulate radiant temperature, often used in maternity wards for newborn babies to provide them with controlled weaning temperature according to medicals standards and practice. Acmed Equipment Infant Warmer range provides a wide range with bed tilt, sensor-based temperature control, alarms and other user-oriented features for effective clinical workflow.
Phototherapy Unit is a light-based therapy assembly which is widely used for primary treatment of neonatal Hyperbilurubinaemia or Jaundice. Acmed Equipment offers a wide range of phototherapy units in various configurations and operational features to deliver better neonatal care solutions.
Phototherapy Unit is a light-based therapy assembly which is widely used for primary treatment of neonatal Hyperbilurubinaemia or Jaundice. Acmed Equipment offers a wide range of phototherapy units in various configurations and operational features to deliver better neonatal care solutions.
Acmed Equipment offers a wide range of superior quality portable and mini-sized Infusion pumps, suited for a wide range of applications in hospitals wards and clinics. Infusion pumps are medical devices capable of delivering a controlled dosage of fluidized drugs, enteral nutrition into a patient's circulatory system.
Acmed Equipment offers a wide selection for Syringe Pump. Our Syringe pump systems are programmed with memory based on safety limits of drugs to deliver intermittent infusion for a specific duration according to associated safety and performance standards.
Acmed Equipment offers a wide selection for Blood or Infusion warmer. Our infusion warmers are designed for leak-proof optimized warming with self-monitored temperature test and alarms as per associated safety and performance standards.
