Infusion Pump KIP–A100 is a single-channel light–weight, drip-type volumetric fluid delivery system. Digitally driven fluid-control, automated calibration and dose titration enhances safety. Peristaltic pumping mechanism ensures precise flow-measurement and prevents back-flow of IV fluid. Backlit display enables suitably ambient illumination to operate even at low light condition.
| Channel | Single channel infusion |
| Volume (VTBI) | 1 ml ~ 9999.9 ml ( 0.1 ml increment) |
| Accuracy | Flow rate: ≤ ± 3 % Mechanical: ≤ ± 2 % |
| KVO Rate | 1 ml/h (1 ml/h ~ 300 ml/h) 3 ml/h (greater than 300 ml/h) |
| Occlusion System | 3 selectable occlusion levels |
| Drop Rate | 1 drop/min ~ 400 drops/min (1 drop/min increment) |
| Infusion Rate | 1.0 ml/h ~99.9 ml/h (0.1 ml/h increment) 100 ml/h ~1200 ml/h (1 ml/h increment) |
| Purge | 800 ml/h |
| Bolus | 10 ml/h ~ 1200 ml/h at 0.1 ml/h (flow rate < 100 ml/h) 10 ml/h ~ 1200 ml/h at 1 ml/h (flow rate > 100 ml/h) |
| Therapy Timer Range | 1 min ~ 9999 min ( 1 min increment) |
| Display | 4.3-inch colour LCD with backlight |
| Drug Library | Database of up to 210 drugs |
| Memory | Up to 1500 record entries |
| Occlusion Threshold | High: 800 mmHg ± 200 mmHg (106.7 kPa ± 26.7 kPa) Medium: 500 mmHg ± 100 mmHg (66.7 kPa ± 13.3 kPa) Low: 300 mmHg ± 100 mmHg (40.7 kPa ± 13.3 kPa) |
| Sensitivity [Bubble detection] | > 25 μL |
| Environmental Condition : Operation | Operating temperature 5 ⁰C ~ 40 ⁰C Operating humidity 20 % ~ 90 % |
| Environmental Condition: Storage | Storage temperature -10 ⁰C ~ 55 ⁰C Storage humidity 10 % ~ 90 % |
| Fuse | F1AL / 250 V |
| Power Supply | AC 85 ~ 265 V, 50/60 Hz, < 40 VA |
| Battery | 11.1 V rechargeable Li-ion battery; > 2000 mAh Works more than 4 hours at 25 ml/h after charging for 8 hours |
| Dimensions | 188 x 198 x 228 mm |
| Weight | 2.5 Kgs |
Infusion Modes - Rate mode, Time mode, Volume mode Automated calibration Provision for infusion fluid warming Built-in drug database library Suitable for all brands of IV set Alarm: Infusion Complete, Occlusion, Door Open, Air Bubble, Low Battery, Setting Error, Power failure, Stand-by
Used in general ward, ICU in hospital to gradually administer intra-venous fluid drug dosage at a predetermined rate through syringe for consistent and effective infusion therapy.
Infant Incubator is used in neonatal care to regulate temperature and humidity conditions inorder to maintain a controlled environment for neonates. Acmed Equipment Infant Incubator range features accurate temperature and humidity monitoring and regulation, accessible outer shell with easy-to-clean surfaces, spacious adjustable baby bed.
Infant Warmer is an essential equipment in neonatal care to regulate radiant temperature, often used in maternity wards for newborn babies to provide them with controlled weaning temperature according to medicals standards and practice. Acmed Equipment Infant Warmer range provides a wide range with bed tilt, sensor-based temperature control, alarms and other user-oriented features for effective clinical workflow.
Phototherapy Unit is a light-based therapy assembly which is widely used for primary treatment of neonatal Hyperbilurubinaemia or Jaundice. Acmed Equipment offers a wide range of phototherapy units in various configurations and operational features to deliver better neonatal care solutions.
Phototherapy Unit is a light-based therapy assembly which is widely used for primary treatment of neonatal Hyperbilurubinaemia or Jaundice. Acmed Equipment offers a wide range of phototherapy units in various configurations and operational features to deliver better neonatal care solutions.
Acmed Equipment presents a wide range of pneumatically driven and electronically controlled ventilators that assist the breathing of adults and paediatric patients alike. Acmed Equipment Ventilators feature configurable loops and trends, invasive and non-invasive ventilation, adult and paediatric ventilation, high-flow oxygen therapy. They are applicable in hospitals, clinics, private practices and ambulances.
Acmed Equipment offers a wide selection for Syringe Pump. Our Syringe pump systems are programmed with memory based on safety limits of drugs to deliver intermittent infusion for a specific duration according to associated safety and performance standards.
Acmed Equipment offers a wide selection for Blood or Infusion warmer. Our infusion warmers are designed for leak-proof optimized warming with self-monitored temperature test and alarms as per associated safety and performance standards.
